Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Problems after I replaced Air Box Thermostat, Air Mass and rpm sensor 200 1990

posted by  BrianO on  Sat Mar 29 14:46 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My wifes 1990 240 had problems with start up and the codes where 233,113 and 121. The mechanic who works only on Volvos said that when he replaced the Air Mass meter, Air Box Thermostat and RPM Sensor(reference Sensor) in the car that it ran fine. So I replaced Air Mass meter, Air Box Thermostat and RPM Sensor(reference Sensor)myself and the car started up and ran very smoothly, but the next day it was starting alittele rough again but not like it did before. When it starts up it wants choke it self out but once you give it gas it settles down. It runs well but at times idels alittle rough. I don't know what is causing this. Any help or information would be great.
Thanks BrianO






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Problems after I replaced Air Box Thermostat, Air Mass and rpm sensor [200][1990]
posted by  BrianO  on Sat Mar 29 14:46 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.