Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20 won't rev enough 140-160 1973

Hi,

I got my 142 back from the panel shop at the weekend - al looking very nice. I had a 2 1/4" exhaust put onat the same time.

The problem is that it won't really rev past about 4000rpm - 70mph? I got between 135 and 150 psi compression, and it does puff a little blue smoke on overruns. I fitted a new Pertronix and cleaned the disributor, timing advances to about 35 degrees, tappets all set at 21thou, plugs cleaned and gapped, distributor cap looks new (and I cleaned it anyway), and the plug leads looked good. No sparking or mistracking when I ran the motor in the dark.
Is this the dreaded worn cam syndrome, or has anyone any suggestions for anything else to look at?

Help me! I want to use the car for a TSD rally next weekend!

Regards

JohnH






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20 won't rev enough [140-160][1973]
posted by  JohnH  on Sun Mar 30 09:45 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.