Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Machine Bolts - Material & Sources? 900

posted by  volvoseeker on  Sun Mar 30 13:30 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 27 19:38 CST 2013
[RELATED]

Hi:

I am curious where to buy what appear to be somewhat non-standard bolts (e.g. the kind used to mount the small slot brackets onto the back inside tailgate door frame, about 1" long). Mine have a bit of rust on them, and I want to replace them before they get away on me. They have a sprial cut thread, with several "channels" cut vertically down the thread-length of the bolt. Could anyone enlighten me on what these are made of and where to get them. They have an integrated washer that is molded into the head. Bolt says BH 88 M on it. What is the vertical cut for? Any recommendations for what to treat the bolt hole with to kill the rust starting on the threads there prior to putting in new ones? Thanks for any ideas.

SM






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Machine Bolts - Material & Sources? [900]
posted by  volvoseeker  on Sun Mar 30 13:30 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.