Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil breather box - clean or replace? 200 1981

posted by  old244 on  Thu Apr 24 14:52 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 17 02:44 CST 2008
[RELATED]

Finally got the breather box off yesterday, now I'm trying to determine how/if I should clean or replace the box. I was thinking that I would just shoot it with a lot of carb cleaner then follow with simple green and water, then let it dry for a day or so. Does that sound reasonable, or would I be better off replacing it totally? Found that PO had breather box off at some point in the past and it was replaced with the o-ring out of place, leading to much oil all over the place.

Thanks,
Jeff






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil breather box - clean or replace? [200][1981]
posted by  old244  on Thu Apr 24 14:52 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.