Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

BRAKE FAILURE light on, but Brakes ok? 200 1986

posted by  starling on  Fri May 9 04:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 9 10:00 CST 2001
[RELATED]

This morning when I started my wagon to go to work, the BRAKE FAILURE light didn't go out after the engine started. I checked the fluid level and it looked good. I applied the brakes a few times and they seemed firm. I drove around the block, stopping deliberately several times and things seemed good. So I went to work.

In the past whenever I had brake problems, I knew it well in advance of the idiot light comming on. So I'm guessing that the brakes are OK and the sensor mechanism is malfunctioning.

Does this seem reasonable? Or could there be something wrong that I'm not detecting?

I'm going to check my shop manuals when I get home, but what could cause this light to come on incorrectly?

thanks!
-Starling






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New BRAKE FAILURE light on, but Brakes ok? [200][1986]
posted by  starling  on Fri May 9 04:10 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.