Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing Steering Rack - Is This Normal? 200 1984

posted by  XR4Tim on  Tue May 13 04:12 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I bought a remanufactured steering rack from Swedish Engineering, and upon installation, found that the threads for the power steering hoses are not the same as on the original rack. On the old rack, the pressure hose used a large (22mm head) banjo bolt, and the return hose used a smaller (19mm head) banjo bolt. On the new rack, both holes are threaded for the larger sized bolt. It sucks when you think you're almost done with a project and something like this comes up. I guess I have to get a new power steering hose with a fitting for a larger bolt, and another large banjo bolt. I don't really want to get another steering rack and have to remove/install everything again. Would any parts store or the dealer have a return hose with the fitting for the larger bolt, or will I have to make my own?

--
'84 245 DL

9s, 40s, and g-rides don't mix.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing Steering Rack - Is This Normal? [200][1984]
posted by  XR4Tim  on Tue May 13 04:12 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.