Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Turbo Conversion for '84 240 200

posted by  SwedishBrick240 on  Tue May 13 08:36 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The N/A motor on my '84 242 is giving out on me. I need a rebuild. I was thinking a better idea would be to pull a turbo motor from another car and rebuild that instead. Is there anything important I need to think about when making this kind of conversion? I won't be doing the swap myself. I need to find a shop in the CA Bay Area to do it for me. I was thinking of rebuilding and boring out the 'new' turbo block before putting it in my car. Is there anything important I need to considire when doing this? Is there anything I may have overlooked? My car is currently a naturally aspirated 240 with the 4 speed automatic tranny and a burnt out LSD rear. (I will probably get a new DANA 30 rear end for that) Any and all advice is greatly needed and very much apreciated. Thanx in advance! -Logan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo Conversion for '84 240 [200]
posted by  SwedishBrick240  on Tue May 13 08:36 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.