Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Anti-Sway Bar Links 700

posted by  ted on  Tue May 20 13:01 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 5 17:15 CST 2000
[RELATED]

I've seen references to a clearance of 42mm between the washers that flank the link bushings. If I adjust the distance to 42mm, there's a significant gap between the bushings and the washers. Clearly, there's a different application here. Is there an alternate way to adjust the nut, or is it a "crank-it-'til-it-looks-good" kinda' thing? Thanks!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Anti-Sway Bar Links [700]
posted by  ted subscriber  on Tue May 20 13:01 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.