Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Repost steering rack rigid high pressure lines 900 1991

posted by  someone claiming to be ibs740 on  Wed May 21 01:59 CST 2003 [RELATED]

I pulled a corroded & leaking line off my rack. The fittings used are a bit bizarre. The lines are 6mm steel (exactly the same as a brake line). The fitting end uses an external threaded nut (same as a brake line)w/ a flat collar fitted a couple of mm from the tube end & the tube end slight flared. An oring is fitted bwtn the tube end & collar. Weird setup.

I fixed it using 1/4 brake line, my bender, flare tool, the old nuts reamed to fit & a swagelock half ferrule turned backwards. Hell it's no odder than the Volvo setup.

You don't have to get a new rack or give the dealer $60.00 for a piece of brakeline.

I don't mind paying for stuff but $60.00 is obscene.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.