Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Shouldn't there be a gasket? 700 1989

posted by  someone claiming to be Nathan Courtright on  Sat May 24 07:39 CST 2003 [RELATED]

List,

I'm putting the reworked head onto my '89 740gle 16 valve. Head is torqued on, and now I'm looking at the gasket set and the cam carrier and wondering, shouldn't there be some sort of gasket between the head surface and the bottom of the cam carrier? I had a slight oil leak there before... Should I try to make something? Seems dumb to attempt to improve on a huge $$$$$$$ factory design. Thanks in advance-

Nathan A. Courtright






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Shouldn't there be a gasket? [700][1989]
posted by  someone claiming to be Nathan Courtright  on Sat May 24 07:39 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.