Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

why a hose clamp on the clutch cable? 200 1983

posted by  frankly on  Sun Jun 8 06:00 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 21 13:20 CST 2000
[RELATED]

83 245 needs clutch cable adjustment.

Authentic Volvo metal-shrouded cable is in place, one COULD adjust knurled plastic portion fore of clutch fork to take up free play in pedal.

EXCEPT for the fact that previous owner put a small, fuel-line type hose clamp around the shrouding, again immediately fore of clutch fork, effectively limiting any more tensioning of the cable.

Should I remove this clamp and try to keep adjusting?

If the affair is clamped down in such a manner, does this mean my clutch is down to minimum?

I have an aftermarket cable from previous 83 242, it's got a nylon adjuster and seems inferior to Volvo one, but should I just put it in and see what happens?

Thanks for suggestions---

Frank
--
Frank R. '83 245DL 170K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New why a hose clamp on the clutch cable? [200][1983]
posted by  frankly  on Sun Jun 8 06:00 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.