Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Heat shield rattling drives me crazy!!! 200

posted by  BobMcCormick on  Mon Jun 16 03:59 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi,

On my 88 240 DL, the sheet metal heat shielding around the exhaust pipes coming out of the manifold has broken free of its spot welding attachment to the exhaust pipes and it rattles like crazy at various engine rpm's. The exhaust pipe seems to be very sound without any leaks.

I'm wondering if I can just cut the durn thing off, or if by doing so I will run the risk of catching something on fire. I removed shielding from further back the pipe several years ago without incident. However, this shield is the one over the pipes just after they exit the exhaust manifold and they are closer to the engine compartment neighbors.

Has anyone had any experience trying to re-weld the shield? Or is there some other fix for this most annoying, irritating noise?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Heat shield rattling drives me crazy!!! [200]
posted by  BobMcCormick  on Mon Jun 16 03:59 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.