Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Inner Tie Rod Ends 200 1989

posted by  someone claiming to be BobL on  Fri Jun 20 03:26 CST 2003 [RELATED]

The replacement Moog, male threaded, tie rod ends that I just purchased are a little different than the ones removed.

The ones removed had a soft shoulder below the male threaded end same diameter as the steering rack. The soft shoulder was center punched to prevent unthreading of the end from the steering rack.

The new parts have no such soft shoulder matching the steering rack diameter. Can anyone suggest the proper method for preventing unthreading of the new ends from the steering rack.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Inner Tie Rod Ends [200][1989]
posted by  someone claiming to be BobL  on Fri Jun 20 03:26 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.