Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Antenna Electrical Adapter/Connection 200 1987

posted by  AndrewinNC on  Wed Jun 25 15:52 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi:

I recently purchased on Ebay a new genuine Volvo electric antenna (fits 240, 700 and 900 series, Volvo part#3533342) motor w/mast for my 87 240GL. Upon installation I noticed that the electrical connections coming in to the antenna motor are different. Coming in are two wires (one red/green and the other just green) The female connections from the car do not align with the male connections on the new antenna. Two female connectors (different alignment) trying to fit into three male connectors (same alignment 2 on top, one below) will not work. The old electric motor did have an adapter (but with prongs.) This too is different and is not compatible here. I went to the Volvo dealership today, and they were unable to tell from their order book what I need. If I was to order one of the adapters shown and it did not work, I would be stuck with it. If anyone is a guru about Volvo parts, could you please let me know what I need?

Thanks!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Antenna Electrical Adapter/Connection [200][1987]
posted by  AndrewinNC subscriber  on Wed Jun 25 15:52 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.