Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'96 964 timing belt screw up! HELP !!! 900

posted by  walt4 on  Tue Jul 1 13:04 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jun 1 13:07 CST 2008
[RELATED]

Greetings... Had to tackle the timing belt today...140K miles and time for the second belt... I opted to replace the idler pulley, tensioner pulley, and water pump at this time also... All new Volvo parts except the water pump... from Autozone, brand is Apora #B 190-1080 made in USA by ASC industries, North Canton, OH, lifetime warranty...half the cost of Volvo water pump... My problem is: whenever I line up the crank pulley marks and the intake and exhaust cam marks the timing belt seems to be off a little when I try to put it on from the crank to the intake cam then over to the exhaust cam... when I release the tensioner and rotate the crank two complete turns the timing marks on the cams do not line up correctly...All I can figure is the waterpump pulley(full teethed) as compared to the Volvo pulley(missing teeth) is of a different size and is throwing everything off... any and all help is truly appreciated...
thanks,,,, Walt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '96 964 timing belt screw up! HELP !!! [900]
posted by  walt4  on Tue Jul 1 13:04 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.