Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timken Front Wheel Bearing Seals 200 1988

posted by  someone claiming to be Sleepy on  Mon Aug 11 06:03 CST 2003 [RELATED]

I bought an '88 240dl from a friend for my dauhgter who will be moving to Louisville soon for school. Checking out the archives regarding a popping noise in the front when turning onto a slight curb, I decided to check out bushings, bearings, etc. I bought Timken bearings and seals from Autozone and noticed the seals are different. The Timken p/n 482126 seal is one piece instead of the two piece retainer ring and rubber seal that was originally on the volvo. I also noticed some disgruntled opinions regarding the OEM seals in the archives. Will the timken seals work in this application and are they an acceptable alternative?? Or should I return them and get the two piece seals??

Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timken Front Wheel Bearing Seals [200][1988]
posted by  someone claiming to be Sleepy  on Mon Aug 11 06:03 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.