Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

oil pan drain bolt 200 1985

posted by  StreetAngel21 on  Sun Aug 17 17:32 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Dec 21 22:16 CST 2011
[RELATED]

Hi everyone. Today, I went to go change the oil in the Vo. The oil pan drain bolt is mighty worn out. it has barely an edges and is rounded off. I spent two hours trying to get the dang thing off with a 15" crecent, vise grips, and even tried filing the bolt to get the edges back. Has anyone else ran into this problem? I'm hoping I don't have to take the oil pan off and replace it... I dread the possibilities of that. Tomorrow, I'm going to take it down to the Valvoline quick lube and see what they say. I looked around everywhere for a new bolt, no luck, so I picked several up at the good ol' junkyard. I figure that it's only $10 more to have the oil change place to replace my oil. Any ideas? I feel ashamed about using the same old bolt for so long and tightening it up too much. Thanks in advance everybody!
--
Michael 'Street'... one AZ '85 244DL 190K miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil pan drain bolt [200][1985]
posted by  StreetAngel21 subscriber  on Sun Aug 17 17:32 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.