Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cruise control wiring 200 1987

First of all, kudos to all who consistantly work and go out of their way to help out fellow brickers here on this board!

OK, I have an 87 240 wagon that I purchased about 2 years ago from some lying ho-bag....wait...sorry...on the instrument cluster Which I've since replaced-all working now-only the fuel and tach (which I installed) worked. so I pulled the cluster and disassembled it to find out the speedo had been already taken apart and ignorantly put back together which made me look for anything that might not be right. I.E. wiring, I found that a red wire labeled #9 from the circular connection on the back of the cluster had been cut but I couldn't find where it goes. Any ideas???

Next I heard the cruise should be an orange wire connected on the double pronged connection on the back...well, I don't have anything there! The fuse #1 which is for cruise does have an orange wire on it, is this supposed to be or has someone connected it where it does not go? All vacuum is good so I'm sure it's wiring. Any help??

Volvolvolvo






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cruise control wiring [200][1987]
posted by  someone claiming to be Volvolvolvo  on Fri Aug 22 11:11 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.