Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Axle oil removal 120-130

Hi,

I would like to change the oil in the rear axle but can only find one plug which I assume is the filler plug (its at the 4 o'clock position mid way between the middle and edge on the plate at the rear of the axle). The axle seems to be filled with oil to near enough the level of this plug. The only way that I can see to remove the oil is to remove the plate that the plug is on (this plate covers the circumference of the rear of the axle). Is this the way to do it or am I missing something? The axle is a Spicer axle (I think) as it has the bolts to the rear whereas the ENV axle seems to have the bolts to the front (where the propshaft meets it).

Any help is much appreciated,

Aidan
--
1967 131






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear Axle oil removal [120-130]
posted by  Aidan  on Sat Sep 6 07:21 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.