Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'82 240 CPR 200 1982

posted by  wndsrfr on  Sat Sep 6 14:52 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 29 19:41 CST 2011
[RELATED]

Still fighting this terrible idle/not wanting to run problem when engine is cold. Went to my BAP parts store & got a replacement control pressure regulator which costs $95.00--got home with it & began mucking around under the manifold where the beast lives--pulled out the CPR and found it had two vacuum lines in a curious loop w/checkvalve. Vacuum source passes thru a temp valve in the block. The new one from the store has no vacuum line ports. Two questions:
1. Should I try to install the one with no vac ports?
2. If not, what is the function of the vacuum to the CPR?

Thanks,
John





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '82 240 CPR [200][1982]
posted by  wndsrfr  on Sat Sep 6 14:52 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.