Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Voltmeter: wired to fuse 4 reads lower than wired to fuse 6???? 200 1986

posted by  Strackerjack on  Thu Sep 11 03:00 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 19:11 CST 2014
[RELATED]

Anyone have a clue what might be going on?

when I wired my voltmeter's hot lead to fuse 4 it read around 12-13V... then when I wired it to fuse 6 it read 14-15V???

I had it on fuse 13 and it was bouncing back and forth whenever I'd use the turn signals so I thought I'd try a different fuse...

shouldn't the voltage on the right side of each fuse be the same as each of the other fuses? therefore giving me a consistent reading no matter the fuse used (if there's power getting to that fuse of course).????

thanks,

jack
--
Bad Blue, '86 245, 253,000 mi., Columbus, Ohio






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Voltmeter: wired to fuse 4 reads lower than wired to fuse 6???? [200][1986]
posted by  Strackerjack subscriber  on Thu Sep 11 03:00 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.