Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

sender pre-pump on 240 - lifting it out carefully? 200 1990

posted by  bob weber on  Sat Oct 4 09:26 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 24 07:35 CST 2011
[RELATED]

Hi all:

Dumb question: I have the 90 240 sender pre-pump unit loose, un-hooked from all hoses and am lifting it out? It seems to be hanging up on the way out of the tank and I don't want to force it (especially around fuel). I have a complete (used unit) with a carter pre-pump and sender ready to put in. Also have a new lock ring, seal and I bought the IPD bung tool to use on the lock ring. Worked like a charm on a rusty ring.

Is there some trick to taking or lifting the unit straight out that I am not aware of? Bentley say "remove carefully" well............ I got tired and thought I would post this before banging it around and blowing myself up! I hate messing with fuel! Any tricks I should know?

Bob Weber
Hamilton, Ohio
52 Volvos since 1979






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New sender pre-pump on 240 - lifting it out carefully? [200][1990]
posted by  bob weber  on Sat Oct 4 09:26 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.