Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

RPM signal to ECU 200 1986

posted by  buff on  Mon Oct 13 06:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a 86 240 DL with LH 2.2 fuel injection. The car stopped while driving and would not start. I replaced the Main Relay and the ECU. No luck.

I'm using the Bentely manual to troubeshoot. On page 241-11 I went through the Main Relay Test. The 86/2 coil is not picking up. The book says that the ECU turns on this coil when it gets a RPM signal. The ECU Test checks for the RPM signal at term 1 of the ECU. I have 12V as required, so I assummed that the rpm signal was OK so I replaced the ECU, but still no luck. HELP






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New RPM signal to ECU [200][1986]
posted by  buff  on Mon Oct 13 06:10 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.