Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Doing coolant switch mod, sound, but no light when tested 700 1988

posted by  someone claiming to be coolman2024 on  Sat Oct 18 04:04 CST 2003 [RELATED]

I was first having trouble to see which connector position the wire from the switch goes to. Finally I just traced the circuitry wire from pos 15(the exhaust temperature pos) and found it goes to pos 12 on the "C" connector. Well, I got it all hooked up correctly, but when I test it, I only get sound from the buzzer, but no exhaust light, I looked at the bulb and switched it with a good one, but still no luck. I just thought of this now, but maybe I installed the buzzer wrong? I just connected the black wire to the one going to the coolant and the red to the "C" connector. Any help would be appreciated!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Doing coolant switch mod, sound, but no light when tested [700][1988]
posted by  someone claiming to be coolman2024  on Sat Oct 18 04:04 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.