Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Control Pressure Regulator 200 1980

posted by  someone claiming to be john on  Mon Oct 27 14:38 CST 2003 [RELATED]

I found an old posting from '98 which discuused how easy it supposedly is to rebuild/clean the control pressure regulator in my 1980 242 DL. On the underside of the control pressure regulator are four flat head screws. I could not remove any of these screws with a screwdriver or impact drill. I soaked the screws in lubricant on both sides, to no avail. I also tried flushing the intake and output ports on top but am not sure that I got is clean.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Control Pressure Regulator [200][1980]
posted by  someone claiming to be john  on Mon Oct 27 14:38 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.