Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

how to: adjusting/modifying 6 CIL(diesel) tacho towards 4 CIL tacho(petrol)? 200 1988

posted by  Kkurt on  Sun Nov 2 06:58 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello,

is it possible to modify(in a simple way) the 6 cil tacho from the 240 diesel for use in my B200(4cil) engine for correct reading?

Extrapolating the info out of the previous posts(tacho 4 cil =>6 cil) I understand, that if just connect this 6 cil diesel tach, it will indicate 66 %(=4/6) of the gasoline engine revving.

The diesel tachs comes out of 1991 240 junkyard.
range 0 .. 6000 rpm
white tag on the back side: 230 128 3
imp: 91440 12V
Between the electronices behind the plate is a 22kOhm potentiometer(adjustment for what...?)


tnx in advance
btw: superior site here!
--
240 '88 B200K 260kkm virgo+all gauges,Phoenix Gold ampli, Focal door speakers, debadged, 6 rear red lights






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New how to: adjusting/modifying 6 CIL(diesel) tacho towards 4 CIL tacho(petrol)? [200][1988]
posted by  Kkurt  on Sun Nov 2 06:58 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.