Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Suspension -Install mounting bolts hand tight,with wheels on ground torque? 200

uid 4357's pic
posted by  nelson on  Tue Nov 4 15:56 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 6 12:52 CST 2001
[RELATED]

I am replacing all of the bushings on my 1990 240 sedan.The manuals [Blue and Green] say to lower the car on to the ground to torque the bolts.Are they kidding!These instructions were obviously written for someone with a "special" lift.You know the type that can raise the car while it is still on a lift. What's a shade tree to do? I don't think I will have enough clearance to crawl under the car,and be in the right position to use a torque wrench.Maybe the rear might be ok but the front control arms?Your thoughts please.TIA
Nelson






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Suspension -Install mounting bolts hand tight,with wheels on ground torque? [200]
posted by  nelson  on Tue Nov 4 15:56 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.