Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

removing the fuel rail; what gives 200 1986

posted by  someone claiming to be car owner on  Sun Nov 23 08:40 CST 2003 [RELATED]

Hi, I have an intake manifold from an 1986/87? volvo 240

It still has the injectors and fuel rail on it. I cannot get the fuel rail off of the injectors. Is it just a snug fit, and I can just pull it off?

I have already removed a metal C-clip for each injector that resides on the top part and seems to connect the injectors to the rail. The clip is like a C shape that is a centimeter thick with two ridges on the top and two ridges on the bottom (so that it can hold the two parts togeter I suppose)

Anyhow if I pull REALLY hard I can see the rubber of the injector comming out a little from the rail, but I don't want to break the injectors, & I can't pull much harder without some sort of reverse clamp...

Am I missing something..
Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New removing the fuel rail; what gives [200][1986]
posted by  someone claiming to be car owner  on Sun Nov 23 08:40 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.