Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cleaning Fuel Injectors 700

uid 21826's pic
posted by  Angus MacSac on  Mon Dec 8 02:06 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have removed the intake manifold on my 1985 740 GLE B230F engine. I did this so I could inspect all the wiring beneath the manifold. The wiring seems to be in pretty good shape except for a 4 inch length near the connector for the temp gauge sensor. I am going to test the ECT sender , also oxygen sensor.

Now I was wondering if I can apply 12 volt directly to the fuel injectors? since they are still in the FI rack attached to the removed manifold? Also what should I use for cleaning the injectors and how might I do this with the manifold off the car.
--
1985 740 GLE, 1981 245 Ice racers






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cleaning Fuel Injectors [700]
posted by  Angus MacSac  on Mon Dec 8 02:06 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.