Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Finally putting in new clutch 200

posted by  someone claiming to be Josh Q on  Fri Dec 12 15:02 CST 2003 [RELATED]

Well after a few months with the new clutch sitting in the closet I started the process today, and of course I have a few questions. First, I have (it's my wife's) an '85 240DL wagon, can I do this job without taking the exhaust off? From the looks of it from under the car I should be able to do everything with the exhaust on. Are the nuts that hold the driveline to the trans and rear end one time use only? On my BMW you have to use new nuts each time because they are slightly oval shaped to keep from coming undone. Lastly, do I just use lots of extensions and a wobbly to get to the top bolts of the trans? It looks pretty tight up there but I don't know for sure. Do I drop the back of the engine an inch for clearance? Thanks for any help.
-Josh






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Finally putting in new clutch [200]
posted by  someone claiming to be Josh Q  on Fri Dec 12 15:02 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.