Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

unidentified part on 3 and 4th injector 700 1988

posted by  740madness on  Sat Dec 20 05:31 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jun 29 21:07 CST 2014
[RELATED]

Trying to locate and change my flame trap and think the mechanic who worked on my injectors did some gerry rigging.

Position: Facing the driver side off the huge air hose, connected to the air filter, a hose goes into a black cup like connector between the 3rd and 4th injector. The black connector large part opening is fitted into the hose and a smaller stem goes into another hose connected to what i thing the breather box. The connector also has a small stem on top side which although has a hole does not seem to go throught into the connector. I stuck a pin with some force and it doesn't go thru. The connector large part opening seems to have three grips around its circumference.

Hopefully the above is not cryptic.

Any help please. Is this a gerry rig?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New unidentified part on 3 and 4th injector [700][1988]
posted by  740madness  on Sat Dec 20 05:31 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.