Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing O-rings on LH-jetronic injectors. Question about kit parts and fitting. 700

Hi guys (and gals?),
I’m replacing O-rings on fuel injectors on my 87 Turbo w/B230FT engine.

The O-ring kits comes with 3 O-rings, yellow shield, and a gray spacer.

Questions on kit:

1) I can use the two O-rings, I don’t know what the other is for. Different injector?
2) Yellow shield is longer. Seems to fit, but I’m weary and fuel delivery issues. Is this the new and better design, or is it for another type? There isn’t one similar to OEM.
If it is for different type, then WTH is the kit for? You can’t expect one to take off the old, brittle, 15-year-old shield without breaking it?!
3) Gray spacer. I don’t know where it goes. I thought of replacing the thin plastic, bronze-colored spacer with it, but it’s much to thick. Again, for different injector?

Parts bought from FCP Groton. Link:
http://www.fcpgroton.com/fuel700900/volvo760b230ft.htm

Same as ipd. Link:
http://www.ipdusa.com/ProductsCat.aspx?CategoryID=1319&NodeID=4962&RootID=629

Many thanks in advance!

regards,
MAJ







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing O-rings on LH-jetronic injectors. Question about kit parts and fitting. [700]
posted by  digital_dreamer  on Sun Dec 21 19:31 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.