|
Just want to remind the readers how much good is in the FAQ. First, I replaced the carrier bearing on the drive shaft and followed the Ginsu Knife suggestion, using a hacksaw and knife. The old bearing came off as suggested. Replacing the bearing was a piece of cake inserting it into the carrier and then mounting it to the shaft. I did clean up the shaft with emery cloth first and then tapped it into place. Smooth and noiseless with no vibration.
Next project is the headliner and I followed the dropping of the pan to remove the sunroof panel. This procedure I strongly advise especially after cleaning drains and chanels of debris. Works perfectly.
The FAQ is better than the Volvo Green in many instances and thanks to Steve Ringlee for making it happen.
Merry Christmas!!
dick
|