The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cheers to the FAQ!! 700

Just want to remind the readers how much good is in the FAQ. First, I replaced the carrier bearing on the drive shaft and followed the Ginsu Knife suggestion, using a hacksaw and knife. The old bearing came off as suggested. Replacing the bearing was a piece of cake inserting it into the carrier and then mounting it to the shaft. I did clean up the shaft with emery cloth first and then tapped it into place. Smooth and noiseless with no vibration.

Next project is the headliner and I followed the dropping of the pan to remove the sunroof panel. This procedure I strongly advise especially after cleaning drains and chanels of debris. Works perfectly.

The FAQ is better than the Volvo Green in many instances and thanks to Steve Ringlee for making it happen.

Merry Christmas!!

dick






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.