Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

worn out shift linkage - how to fix? 200 1989

posted by  Arthur on  Sun Jan 11 13:09 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 2 07:35 CST 2014
[RELATED]

'89 240 375,000 km manual transmission

I've adjusted the reverse lockout plate as far as it will go, now the linkage has worn to the point where it is a real problem to find first gear, second is not much better.

I'm going to do the clutch as soon as it warms up. While the tranny is out I want to replace the worn shifter parts.

Can anyone tell me what needs to be done? Do I need to go into the gearbox or is this accessible from outside?

Arthur






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New worn out shift linkage - how to fix? [200][1989]
posted by  Arthur  on Sun Jan 11 13:09 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.