Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Next Steps for 240 Axle Swap Out? Replacement Axle is in Position. What's Next? 200 1988

posted by  Gorgewarrior on  Mon Jan 26 19:42 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

http://groups.msn.com/portlandpicks/computer.msnw?action=ShowPhoto&PhotoID=1559
Cut and paste the above link to see where I am in the process of replacing my axle. New axle is in position under the car. Is this the order of putting it back together --
1. Reattach Rear Main Trailing Arm bolts,
2. Sway Bar
3. Lift Axle into Position,
4. Rehang Exhaust and Remount Shock Bolts
5. Springs and Spring Bolts
6. Torque Rod Bolts
7. Track Rod Bolts
8. Drive Shaft Bolts
9. Reattach Calipers, then Brake Lines
10. Hand Brake Lines
11. Speedo Line
12. Fill w/ Oil
(Old Axle Ran Dry and Blew up)
As Always, Any Advice is Appreciated. Thanks, Greg in Portland







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Next Steps for 240 Axle Swap Out? Replacement Axle is in Position. What's Next? [200][1988]
posted by  Gorgewarrior  on Mon Jan 26 19:42 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.