Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Husher and other head related seals, shimming the VX 200

posted by  KarmaticLove on  Thu Feb 19 13:49 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Gentlemen,

The top of the engine is soon to be outta hear in preparation for the new head gasket & VX install. I plan to replace every gasket & seal related to the project with freshies.

I was curious as to where to purchase the husher & valve stem seals... do I get them from my local Volvo dealer? Exactly what is it that I will need to recondition the head? I would like to purchase that in advance.

Also, if anyone could supply me with some information as to how far out, in general, the valve lash was when they did the VX install.

Thanks, as always, Jon (aka... I'm Rick James, Bitch!!!)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Husher and other head related seals, shimming the VX [200]
posted by  KarmaticLove  on Thu Feb 19 13:49 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.