Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rebuilding a 5-speed / M47 200

posted by  Bennie on  Fri Feb 20 06:32 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Nov 28 03:03 CST 2007
[RELATED]

Hi brickers,
I have an early M47 gearbox with connection for a mechanical speedo. The tranny is quite noisy and I can feel play on the output shaft bearing (and input, but that normal being a C4 bearing). I also have a late M47 wich is in good condition. Since I need the speedo drive, will I be able to 'transplant' the drive parts (bearings,gears) from the late to the early type M47??

Thanks, Ben

btw. This early M47 moves the gear stick in 5th gear. When accelerating it moves forward, and when deccelarating it moves backwards (or the other way around, dunno anymore)(I think difference in position is about 2 or 3 cm). Is this normal, or also a sign of the tranny's wear...

Thanks again






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rebuilding a 5-speed / M47 [200]
posted by  Bennie  on Fri Feb 20 06:32 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.