Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Intermittant metal tap and bell sound from contact- mounts? 200 1990

posted by  ricefive on  Sun Feb 29 18:07 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Nov 29 07:33 CST 2010
[RELATED]

I have an M47 in my 1990 240. Driving on the freeway yesterday, I thought I had an exhaust problem from the manifold. It was noisey and it went with the rpms. Then I exited the freeway and in town in quit. I got home and it started up again on my driveway. I put my car on jackstands and checked the transmission fluid- it was full. I started the car again and something metal hit something and made a bell/ring sound. I increased the rpms and it stopped. What can make that bell sound? Is it transmission mounts going bad? Any ideas?
--
1990 240- 245K- Original Owner-M-47, VX cam, IPD sprt springs, bilstiens, spt exh, euro lamps-turbo whls,- still slow but handles well- Near Houston






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Intermittant metal tap and bell sound from contact- mounts? [200][1990]
posted by  ricefive subscriber  on Sun Feb 29 18:07 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.