Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ball valve in AW71L 900

uid 6185's pic
posted by  blue940 on  Sun Mar 7 09:47 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 21:11 CST 2014
[RELATED]

Car: 91 940GL B230F & AW71L

My car shifts very hard from 1st to 2nd gear. I have had the fluid flushed and the kickdown cable is adjusted correctly but it hasn't made any difference. I'm going to order the ball valve discussed in the FAQ (small blue valve ball) that controls the shifting. My questions are: can I replace this ball myself? Have other people done this? How hard is it to do? Are there any special tools needed? I'd really like to have a go at this myself if possible as I don't like taking my car to mechanics if I can avoid it (not many good ones around where I live). Can anyone provide some instructions on the ball valve's replacement?

Any advice will be much appreciated

Regards
Brad
Australia






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ball valve in AW71L [900]
posted by  blue940  on Sun Mar 7 09:47 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.