Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

crash position sensor & power pack... SRS question 200 1990

posted by  KarmaticLove on  Tue Mar 9 04:25 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Gentlemen,

Is the crash position sensor/power pack simply plug & play?

After the install, all I need to do is reset the diagnostic unit via the instructions in the FAQ?

Or, can I leave the battery disconnected for a time?

I am replacing the faultly unit from a time last summer when I "fixed" the lower steering universal and destroyed the contact reel in the process -which ultimately set off the crash sensor.

The contact reel has been repaired & a code/light still exists on the dash display. I searched the FAQ, got the codes, diagnosed the issue... and found a good unit on ebay for $30 w/ shipping and a 30 day warranty (got initial quotes from $100-350). Any wisdom would be appreciated.

TIA, Jon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New crash position sensor & power pack... SRS question [200][1990]
posted by  KarmaticLove  on Tue Mar 9 04:25 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.