Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A/C service fittings on 1992 and later 740/940

posted by  mapleleafer on  Sat Mar 13 10:38 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 9 00:36 CST 2013
[RELATED]

I came across a good A/C compressor (OEM Diesel Kiki/Zexel DKS-15) from a 1992. There are no gauge ports on the rear of the compressor where they existed until at least 1990. There are undrilled flat spots where the earlier compressor have fittings. I want to use it as a replacement on an earlier car but I need update the lines to accomodate the missing fitting. There is a second low side port on the accumulator/drier, but where did the later car locate the high side port? ...one of the two hose assemblies or is it on the metal tube running over the chassis?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C service fittings on 1992 and later 740/940
posted by  mapleleafer  on Sat Mar 13 10:38 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.