Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cooling fan removal - fan integral to clutch 200 1980

posted by  zrubin on  Sat Mar 27 10:44 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 20 15:45 CST 2012
[RELATED]

I'm trying to remove the cooling fan from my B21F (taking the clinder head off) - it's the type where the fan and clutch are not separable (picture 5.9B in Haynes I think). There's just one bolt in the center of the assembly. The problem is that whenever I apply any torque, the fan assembly spins - the belts are not moving, the pulley/housing is slipping under the belts. Belts are tight, transmission is in gear, parking brake is applied.

How does this bolt get removed???

Thanks for any advice...

Zack
1980 245DL M46 272k
1988 745T+ M46 190k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cooling fan removal - fan integral to clutch [200][1980]
posted by  zrubin  on Sat Mar 27 10:44 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.