Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Check Engine Light: OBD Fuel Trim Error 200

posted by  Green Lantern on  Mon Mar 29 03:31 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 23 09:01 CST 2001
[RELATED]

Hello,

Just recently the check engine light in my 1991 245 (B230F) has come on. I followed the directions provided in the 700/900 FAQ section of this website for obtaining the errors produced by the onboard diagnostic system. The error code I got from the Bosch LH Jetronic 2.4 system is 2-3-2:

"Fuel trim (lambda control) too lean or too rich at idle".

Just by the smell and recent gas milage I know that the car is running too rich. If this is the case the 700/900 FAQ section informs me that I have a high fuel pressure problem or leaking injector. What is the best method to test for these problems? Could the oxygen sensor also be at fault?

Also, I unsuccessfully tried to reset the OBD system first following the Haynes and then the 700/900 FAQ section instructions. Has anyone esle encountered this problem?

Thanks for the help ahead of time.

Greg
--
1982 242 GLT, 1982 244 GL, 1983 242ti, 1983 244ti, 1984 244ti, 1986 245 DL, 1991 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Check Engine Light: OBD Fuel Trim Error [200]
posted by  Green Lantern  on Mon Mar 29 03:31 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.