Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Low Voltage at Ignition Coil - No Spark (I've Read the FAQ) 700

posted by  Jolly on  Thu Apr 15 16:55 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi Everyone,

I own a 88' 740 GLE 5spd Station Wagon. I am not getting a spark from the ignition coil. I have replaced the ignition coil, distributor (equipped with Hall Sensor) and ignition amplifier (thank god I can still return these); however, I still read approximately only 4.75V at the ignition coil. I don't see a spark when I ground the number one spark plug. Battery is OK and so are the fuses.

Does anyone have an idea of what I should be testing next? I read in the FAQ that the hall sensor cable has a connection at the firewall? Is this true for my model. The hall sensor cable joins a number of other electrical cables and enters thru the firewall inside a big rubber plug which has been difficult to remove. Is this worth the effort? I am at my wits end and would appreciate any help that you all can provide.

Best Regards,
Niclas






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Low Voltage at Ignition Coil - No Spark (I've Read the FAQ) [700]
posted by  Jolly  on Thu Apr 15 16:55 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.