Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Is there anything specific I need to know before I let a machine shop press in a tailshaft bushing on my 85 AW-70 trans. 200 1985

posted by  Kyle245 on  Fri May 7 07:11 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 10 04:45 CST 2014
[RELATED]

I am going to remove the tailshaft housing and have a machine shop press in a new bushing.

Is there anything I need to let them know before hand to avoid damaging the new bushing?

Any advice is greatly appreaciated.

Kyle245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Is there anything specific I need to know before I let a machine shop press in a tailshaft bushing on my 85 AW-70 trans. [200][1985]
posted by  Kyle245 subscriber  on Fri May 7 07:11 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.