Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Door panel on 780 700

posted by  KlausC on  Fri May 7 14:09 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

My driver's side door panel was loose at the top where it joins the window. The 1988 Bertone needs a lot of love. It looks like a piece of wood had been stapled to the vinyl, the wood carries the rubber strip which touches the window. Is this really how the panel is attached? It doesn't seem very sturdy. Someone had used duct tape over the metal railing to help seat the metal clips and hold the rubber to the window. How is it supposed to be attached? I don't want the rubber strip to be loose or the door panel either.

Any suggestions? The duct tape was dried out - it should bake easily in the hot sun.

Thanks,
Klaus
--
95 850, 88 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Door panel on 780 [700]
posted by  KlausC subscriber  on Fri May 7 14:09 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.