Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

thermostat housing bolts 900 1995

uid 22712's pic
posted by  bomhauer on  Thu May 13 11:44 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jun 28 15:03 CST 2008
[RELATED]

I'm trying to replace my thermostat on my '95 960 but can't get one of the housing bolts loose. I've tried PB blaster several times but no luck. I've put the #40 torx bit on an extension and hit it with a hammer to shock it loose but no luck. Looks to be an aluminum bolt into the aluminum housing.
I guess I could leave it alone since the thermostat currently works but I would like to change it out. I'm planning a 2000 mile vacation in a week and don't know if the thermostat has ever been changed (88,000 miles) so I'm trying to do it myself since it is such an inexpensive part.
Should I try it when the engine is somewhat hot?
I'm a shade tree mechanic and I'm afaid I'm about to strip the bolt head.
any advise is welcome.
(The thermostat is located at the other end of the top radiator hose...isn't it? )
bomhauer






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New thermostat housing bolts [900][1995]
posted by  bomhauer  on Thu May 13 11:44 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.