Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Quick answer if poss - big washers on control arm missing ?? 700

posted by  Andrew in AL on  Thu May 20 11:16 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:17 CST 2014
[RELATED]

Had a local mechanic do all the bushings in the front end. Just noted while under it that I do not see those large washers I ordered from FCP Groton.

Are there supposed to be big washers on the outside of the rear mounting flange that comes down from the frame - behind the outer bolt? What I saw when changing the oil filter was the bolt with the nut - pressing out what looks to be rubber. There is no washer that I can see.

Thanks
Andy Smith
Andrew in AL
--
'94 940T (175K) , '92 745T (193K)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Quick answer if poss - big washers on control arm missing ?? [700]
posted by  Andrew in AL subscriber  on Thu May 20 11:16 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.