Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B21F alternator pivot stuck 200 1980

posted by  zrubin on  Tue Jun 8 09:27 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 20 15:45 CST 2012
[RELATED]

The 2 belts that run on the alternator, water pump, and crank pulleys are tightened by positioning the alternator - the problem is I can't get the alternator to pivot on its mounts the way it's supposed to. I loosened all 3 connections, tried different combinations of 2 loose/1 tight, but still it won't budge. Tried prying it up or down, hitting it with a hammer (ok this was out of frustration, not a good idea), still nothing - tried spraying the slotted bracket with lube, didn't help. Was a major pain getting the new drive belts on this way (and of course they're a bit loose now that they're on), and I want to avoid this in the future (it was so easy to get the PS belt on with the pump pivoting the way it's supposed to). What are my options - hopefully there's a trick other than replacing the alternator mounting hardware.

Thanks

Zack
1980 245DL M46 272k
1988 745T+ M46 193k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B21F alternator pivot stuck [200][1980]
posted by  zrubin  on Tue Jun 8 09:27 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.